NF24G-MP-L
Привод BELIMO NF24G-MP-L
Описание
Описание
Характеристики
Технические характеристики
Артикул
NF24G-MF-L
Вспомогательные переключатели
Нет
Кабель
1 м, 4 x 0.75 мм
Крутящий момент
10 Нм
Питание
24 В~/=
Площадь заслонки
4 м
Присоединение
Универсальный захват
Серия
NF_G
Управление
10 Нм
Electrical data
Nominal voltage
AC/DC 24 V
Nominal voltage frequency
50/60 Hz
Nominal voltage range
AC 19.2...28.8 V / DC 21.6...28.8 V
Power consumption in operation
7 W
Power consumption in rest position
3.5 W
Power consumption for wire sizing
9.5 VA
Connection supply / control
Cable 1 m, 4 x 0.75 mm
Parallel operation
Yes (note the performance data)
Functional data
Torque motor
Min. 10 Nm
Torque spring return
Min. 10 Nm
Positioning signal Y
DC 0...10 V
Positioning signal Y note
Input impedance 100 k
Control signal Y variable
Open-close
3-point (AC only)
Modulating (DC 0...32 V)
Operating range Y
DC 2...10 V
Operating range Y variable
Start point DC 0.5...30 V
End point DC 2.5...32 V
Position feedback U
DC 2...10 V
Position feedback U note
Max. 0.5 mA
Position feedback U variable
Start point DC 0.5...8 V
End point DC 2.5...10 V
Position accuracy
±5%)
Direction of motion motor
Selectable with switch 0 / 1)
Direction of motion emergency control function
L (ccw))
Direction of motion note
Y = 0 V: At switch position 0 (ccw rotation) / 1 (cw rotation))
Direction of motion variable
Electronically reversible)
Manual override
By means of hand crank and locking switch)
Angle of rotation
Max. 95°)
Angle of rotation note
adjustable starting at 33% in 2.5% steps (with mechanical end stop))
Running time motor
150 s / 90°)
Motor running time variable
40...150 s)
Running time emergency control position
‹20 s / 90°)
Adaption setting range
manual (automatic on first power-up))
Adaption setting range variable
No action
Adaption when switched on
Adaption after pushing the gear disengagement button)
Override control
MAX (maximum position) = 100%
MIN (minimum position) = 0%
ZS (intermediate position, AC only) = 50%)
Override control variable
MAX = (MIN + 32%)...100%
MIN = 0%...(MAX – 32%)
ZS = MIN...MAX
Sound power level motor
40 dB(A)
Spindle driver
Universal spindle clamp 12...26.7 mm
Position indication
Mechanically, pluggable
Service life
Min. 60,000 emergency positions
Safety
Protection class IEC/EN
III Safety extra-low voltage
Protection class UL
UL Class 2 Supply
Degree of protection IEC/EN
IP66
Degree of protection NEMA/UL
NEMA 4, UL Enclosure Type 4
EMC
CE according to 2004/108/EC
Certification IEC/EN
IEC/EN 60730-1 and IEC/EN 60730-2-14
Certification UL
cULus according to UL 60730-1A, UL 60730-2-14 and CAN/CSA E60730-1:02
Mode of operation
Type 1.AA
Rated impulse voltage supply / control
0.8 kV
Control pollution degree
4
Ambient temperature
-30...50°C
Ambient temperature note
-40...50°C for actuator with integrated heating
Non-operating temperature
-40...80°C
Ambient humidity
100% r.h.
Maintenance
Maintenance-free
Weight
Weight
4.9 kg
Отзывы
Задать вопрос
Вы можете задать любой интересующий вас вопрос по товару или работе магазина.
Наши квалифицированные специалисты обязательно вам помогут.
Характеристики
Технические характеристики
Артикул
NF24G-MF-L
Вспомогательные переключатели
Нет
Кабель
1 м, 4 x 0.75 мм
Крутящий момент
10 Нм
Питание
24 В~/=
Площадь заслонки
4 м
Присоединение
Универсальный захват
Серия
NF_G
Управление
10 Нм
Electrical data
Nominal voltage
AC/DC 24 V
Nominal voltage frequency
50/60 Hz
Nominal voltage range
AC 19.2...28.8 V / DC 21.6...28.8 V
Power consumption in operation
7 W
Power consumption in rest position
3.5 W
Power consumption for wire sizing
9.5 VA
Connection supply / control
Cable 1 m, 4 x 0.75 mm
Parallel operation
Yes (note the performance data)
Functional data
Torque motor
Min. 10 Nm
Torque spring return
Min. 10 Nm
Positioning signal Y
DC 0...10 V
Positioning signal Y note
Input impedance 100 k
Control signal Y variable
Open-close
3-point (AC only)
Modulating (DC 0...32 V)
Operating range Y
DC 2...10 V
Operating range Y variable
Start point DC 0.5...30 V
End point DC 2.5...32 V
Position feedback U
DC 2...10 V
Position feedback U note
Max. 0.5 mA
Position feedback U variable
Start point DC 0.5...8 V
End point DC 2.5...10 V
Position accuracy
±5%)
Direction of motion motor
Selectable with switch 0 / 1)
Direction of motion emergency control function
L (ccw))
Direction of motion note
Y = 0 V: At switch position 0 (ccw rotation) / 1 (cw rotation))
Direction of motion variable
Electronically reversible)
Manual override
By means of hand crank and locking switch)
Angle of rotation
Max. 95°)
Angle of rotation note
adjustable starting at 33% in 2.5% steps (with mechanical end stop))
Running time motor
150 s / 90°)
Motor running time variable
40...150 s)
Running time emergency control position
‹20 s / 90°)
Adaption setting range
manual (automatic on first power-up))
Adaption setting range variable
No action
Adaption when switched on
Adaption after pushing the gear disengagement button)
Override control
MAX (maximum position) = 100%
MIN (minimum position) = 0%
ZS (intermediate position, AC only) = 50%)
Override control variable
MAX = (MIN + 32%)...100%
MIN = 0%...(MAX – 32%)
ZS = MIN...MAX
Sound power level motor
40 dB(A)
Spindle driver
Universal spindle clamp 12...26.7 mm
Position indication
Mechanically, pluggable
Service life
Min. 60,000 emergency positions
Safety
Protection class IEC/EN
III Safety extra-low voltage
Protection class UL
UL Class 2 Supply
Degree of protection IEC/EN
IP66
Degree of protection NEMA/UL
NEMA 4, UL Enclosure Type 4
EMC
CE according to 2004/108/EC
Certification IEC/EN
IEC/EN 60730-1 and IEC/EN 60730-2-14
Certification UL
cULus according to UL 60730-1A, UL 60730-2-14 and CAN/CSA E60730-1:02
Mode of operation
Type 1.AA
Rated impulse voltage supply / control
0.8 kV
Control pollution degree
4
Ambient temperature
-30...50°C
Ambient temperature note
-40...50°C for actuator with integrated heating
Non-operating temperature
-40...80°C
Ambient humidity
100% r.h.
Maintenance
Maintenance-free
Weight
Weight
4.9 kg
Отзывы
Задать вопрос
Вы можете задать любой интересующий вас вопрос по товару или работе магазина.
Наши квалифицированные специалисты обязательно вам помогут.
Характеристики
| Технические характеристики | АртикулNF24G-MF-LВспомогательные переключателиНетКабель1 м, 4 x 0.75 ммКрутящий момент10 НмПитание24 В~/=Площадь заслонки 4 мПрисоединениеУниверсальный захватСерияNF_GУправление10 Нм Electrical dataNominal voltageAC/DC 24 VNominal voltage frequency50/60 HzNominal voltage rangeAC 19.2...28.8 V / DC 21.6...28.8 VPower consumption in operation7 WPower consumption in rest position3.5 WPower consumption for wire sizing9.5 VAConnection supply / controlCable 1 m, 4 x 0.75 mmParallel operationYes (note the performance data)Functional dataTorque motorMin. 10 NmTorque spring returnMin. 10 NmPositioning signal YDC 0...10 VPositioning signal Y noteInput impedance 100 kControl signal Y variableOpen-close3-point (AC only)Modulating (DC 0...32 V)Operating range YDC 2...10 VOperating range Y variableStart point DC 0.5...30 V End point DC 2.5...32 VPosition feedback UDC 2...10 VPosition feedback U noteMax. 0.5 mAPosition feedback U variableStart point DC 0.5...8 VEnd point DC 2.5...10 VPosition accuracy±5%)Direction of motion motorSelectable with switch 0 / 1)Direction of motion emergency control functionL (ccw))Direction of motion noteY = 0 V: At switch position 0 (ccw rotation) / 1 (cw rotation))Direction of motion variableElectronically reversible)Manual overrideBy means of hand crank and locking switch)Angle of rotationMax. 95°)Angle of rotation noteadjustable starting at 33% in 2.5% steps (with mechanical end stop))Running time motor150 s / 90°)Motor running time variable40...150 s)Running time emergency control position‹20 s / 90°)Adaption setting rangemanual (automatic on first power-up))Adaption setting range variableNo actionAdaption when switched on Adaption after pushing the gear disengagement button)Override controlMAX (maximum position) = 100% MIN (minimum position) = 0% ZS (intermediate position, AC only) = 50%)Override control variableMAX = (MIN + 32%)...100% MIN = 0%...(MAX – 32%) ZS = MIN...MAXSound power level motor40 dB(A)Spindle driverUniversal spindle clamp 12...26.7 mmPosition indicationMechanically, pluggableService lifeMin. 60,000 emergency positionsSafetyProtection class IEC/ENIII Safety extra-low voltageProtection class ULUL Class 2 SupplyDegree of protection IEC/ENIP66Degree of protection NEMA/ULNEMA 4, UL Enclosure Type 4EMCCE according to 2004/108/ECCertification IEC/ENIEC/EN 60730-1 and IEC/EN 60730-2-14Certification ULcULus according to UL 60730-1A, UL 60730-2-14 and CAN/CSA E60730-1:02Mode of operationType 1.AARated impulse voltage supply / control0.8 kVControl pollution degree4Ambient temperature-30...50°CAmbient temperature note-40...50°C for actuator with integrated heatingNon-operating temperature-40...80°CAmbient humidity100% r.h.MaintenanceMaintenance-freeWeightWeight4.9 kg |
| Артикул | NF24G-MF-L |
| Вспомогательные переключатели | Нет |
| Кабель | 1 м, 4 x 0.75 мм |
| Крутящий момент | 10 Нм |
| Питание | 24 В~/= |
| Площадь заслонки | 4 м |
| Присоединение | Универсальный захват |
| Серия | NF_G |
| Управление | 10 Нм |
| Nominal voltage | AC/DC 24 V |
| Nominal voltage frequency | 50/60 Hz |
| Nominal voltage range | AC 19.2...28.8 V / DC 21.6...28.8 V |
| Power consumption in operation | 7 W |
| Power consumption in rest position | 3.5 W |
| Power consumption for wire sizing | 9.5 VA |
| Connection supply / control | Cable 1 m, 4 x 0.75 mm |
| Parallel operation | Yes (note the performance data) |
| Torque motor | Min. 10 Nm |
| Torque spring return | Min. 10 Nm |
| Positioning signal Y | DC 0...10 V |
| Positioning signal Y note | Input impedance 100 k |
| Control signal Y variable | Open-close3-point (AC only)Modulating (DC 0...32 V) |
| Operating range Y | DC 2...10 V |
| Operating range Y variable | Start point DC 0.5...30 V End point DC 2.5...32 V |
| Position feedback U | DC 2...10 V |
| Position feedback U note | Max. 0.5 mA |
| Position feedback U variable | Start point DC 0.5...8 VEnd point DC 2.5...10 V |
| Position accuracy | ±5%) |
| Direction of motion motor | Selectable with switch 0 / 1) |
| Direction of motion emergency control function | L (ccw)) |
| Direction of motion note | Y = 0 V: At switch position 0 (ccw rotation) / 1 (cw rotation)) |
| Direction of motion variable | Electronically reversible) |
| Manual override | By means of hand crank and locking switch) |
| Angle of rotation | Max. 95°) |
| Angle of rotation note | adjustable starting at 33% in 2.5% steps (with mechanical end stop)) |
| Running time motor | 150 s / 90°) |
| Motor running time variable | 40...150 s) |
| Running time emergency control position | ‹20 s / 90°) |
| Adaption setting range | manual (automatic on first power-up)) |
| Adaption setting range variable | No actionAdaption when switched on Adaption after pushing the gear disengagement button) |
| Override control | MAX (maximum position) = 100% MIN (minimum position) = 0% ZS (intermediate position, AC only) = 50%) |
| Override control variable | MAX = (MIN + 32%)...100% MIN = 0%...(MAX – 32%) ZS = MIN...MAX |
| Sound power level motor | 40 dB(A) |
| Spindle driver | Universal spindle clamp 12...26.7 mm |
| Position indication | Mechanically, pluggable |
| Service life | Min. 60,000 emergency positions |
| Protection class IEC/EN | III Safety extra-low voltage |
| Protection class UL | UL Class 2 Supply |
| Degree of protection IEC/EN | IP66 |
| Degree of protection NEMA/UL | NEMA 4, UL Enclosure Type 4 |
| EMC | CE according to 2004/108/EC |
| Certification IEC/EN | IEC/EN 60730-1 and IEC/EN 60730-2-14 |
| Certification UL | cULus according to UL 60730-1A, UL 60730-2-14 and CAN/CSA E60730-1:02 |
| Mode of operation | Type 1.AA |
| Rated impulse voltage supply / control | 0.8 kV |
| Control pollution degree | 4 |
| Ambient temperature | -30...50°C |
| Ambient temperature note | -40...50°C for actuator with integrated heating |
| Non-operating temperature | -40...80°C |
| Ambient humidity | 100% r.h. |
| Maintenance | Maintenance-free |
| Weight | 4.9 kg |
